ORICOM UHF390 5 WATT 80 CHANNEL UHF RADIO+UNIDEN AT880 TWIN ANTENNA 6.6DBI
FREE TRACKABLE POST AUSTRALIA WIDE
ORICOM UHF390 5 WATT 80 CHANNEL UHF RADIO WITH REMOTE MICROPHONE FUNCTION
5 YEAR AUSTRALIA WARRANTY
Key Features
• 80 Narrowband channels*
• 5 watts (max TX power)
• Heavy duty controller speaker microphone
• Ultra compact transceiver
• Rotary volume & channel knob
• 5 Digit Selcall ID with alpha display
• CTCSS and DCS
• Tri colour backlit LCD display (Amber/Red/Green)
• Duplex (range extender)
• Open/Priority and Instant Channel Scan
• Digital squelch control
• Busy channel lockout
• Rugged chassis construction with integrated heat sink
Compliance AS/NZS 4365:2011 Number of TX/RX Channels 80 UHF CB Channel Spacing TX/RX 12.5KHz Operating modes Simplex, Repeater TX offset (+750kHz) Selcall ID 5 Digit with alpha display Scanning Speed 130 msec per channel Antenna Impeadance 50 Ohms Operating Volts nominal 13.8 VDC Operating Volts Range 10 to 15 VDC Over Voltage Protection Diode and voltage regulator Over Current Protection 2 Amp fuse Reverse Polarity Protection Shunt diode Frequency Stability +/- 5ppm Transmitter RF Output Power Nominal 5watts Modulation F3E (FM) Maximum Deviation 2.5kHz Spurious Emissions < -30 dBm TX Audio pre-emphasis + 6dB/octave from 300Hz to 3kHz Current Consumption during TX 1.6 Amps with 50 Ohm antenna termination Reciever Circuit Type Dual conversion superheterodyne IF Frequencies 1st IF = 21.4MHz , 2nd IF = 450kHz Current Consumption during RX 200mA Sensitivity < -123dBm at 12dB SINAD Sensitivity Receive only channels < -110dBm for 12dB SINAD Selectivity +/-3.75kHz min @ 3dB to +/-15kHz max @ 40dB Intermodulation Immunity > 70dB Spurious Immunity > 70dB Audio Output Power 3 Watts Maximum RX Audio de-emphasis -6dB/octave 300Hz to 3kHz Audio frequency response 300Hz to 3kHz External speaker jacks One on transceiver one on head unit for optional 8 Ohm mono speaker (3.5mm jack.) Transciever Dimensions 135 (d) x 110 (w) x 29 (h) mm
UNIDEN AT880 TWIN 6.6iDB+3DBI UHF CB FIBREGLASS ANTENNA KIT
The AT880 TWIN is a highly flexible and heavy duty whip suitable for 4WD. Engineered and designed for all round use, flat terrain, town and country, the AT880 TWIN is a rugged and durable antenna to suit your driving needs. Ground independent with an included 14cm 3.0 dBi Gain whip, provides excellent performance and perfect flexibility to tune channels, ideal for your vehicle. A high quality elevated feed and fibreglass whip with black heat shrink, the AT880 TWIN is a solid choice for heavy usage, engineered for the toughest conditions and off road environments.
Suitable for Sedan, Trucking, 4WD & Agricultural & Construction Equipment
Key Features
Elevated Feed and Fibreglass Whip with Black Heat Shrink 6.6 dBi Gain
Incl. 14cm 3.0 dBi Gain
Highly Flexible Whip
Heavy Duty Barrel Style Stainless Steel Spring
Length: 932mm/442mm
Ground Independent
4.5 Metres Low Loss Coax Cable
Terminated FME Female Connector and PL259 Adaptor